In the actual installation and construction process, the color steel tile needs to be installed with its sealing strip, ridge tile and eaves cover, so that it can be firmly installed on the roof, playing the effect of waterproof and other excellent performance. So how to use sealing strip, ridge tile and eaves cover? Xiaobian is here to teach you.

　　1、密封条分开两半对照彩钢瓦的形状压在屋顶处盖上脊瓦使用专用钉固定。

　　1. The sealing strip is divided into two halves and pressed against the shape of color steel tile on the roof to cover the ridge tile and fix it with special nails.

　　2、侧面瓦的交接处，用水泥作密封处理后直接盖上脊瓦，脊瓦底部用小瓦档收尾。

　　2. The joint of side tiles shall be sealed with cement and then directly covered with ridge tiles, and the bottom of ridge tiles shall be closed with small tiles.

　　3、彩钢瓦的下端即屋檐处直接安装封檐盖使用螺钉固定。

　　3. The lower end of the colored steel tile, i.e. the eaves, is directly installed with the eaves cover and fixed with screws.

　　4、脊瓦交接处，对照接口用剪刀修剪成型后重叠并使用玻璃胶密封。

　　4. At the junction of the back tile, the control interface shall be clipped and overlapped with scissors and sealed with glass glue.

　　所以虽然彩钢瓦本身具有的性能优势非常高，但要想充分的发挥出来，还是需要配合其他零件的功效，因此不仅要正确安装彩色压型瓦，更要正确安装其他零部件，从而更好的辅助其功效的稳定发挥。

　　Therefore, although the color steel tile itself has a very high performance advantage, it still needs to cooperate with the effect of other parts in order to give full play to it. Therefore, it is not only necessary to correctly install the color pressed tile, but also to correctly install other parts, so as to better assist the stable play of its effect.