热门关键词： 济南彩钢板 | 济南复合板 | 济南彩钢瓦 | 济南c型钢 | 济南钢结构 |
Jinan C-section steel is processed by hot coil cold bending, with thin wall, light weight, excellent section performance and high strength. Compared with traditional channel steel, the same strength can save 30% of materials. But many consumers don't know much about it. Next, let's introduce in detail how the thick wall quality control of C-section steel is.
Scope of application of C-section steel: C-section steel is widely used in purlins and wall beams of steel structure buildings, and can also be combined into lightweight roof truss, bracket and other building components. In addition, it can also be used for columns, beams and arms in mechanical and light industry manufacturing.
Different users have different requirements for the wall thickness of C-section steel. If we want to meet these requirements at the same time, the selected C-beam production process and equipment are very key. Generally, it is difficult to produce C-section steel by cold rolling, so C-section steel should be machined.
After the material enters from the tail of Jinan C-beam machine, it is pressed down by various rollers, and the formed C-beam is output from the head. This not only optimizes the necessary production process, but also increases the output. It ensures the uniform wall thickness and complex interface shape of caesarean section products.
In order to achieve accurate wall thickness, when pressing C-section steel, the upper die and some of the same dimensions used by C-section steel machine, and the dimensions and dimensions of the lower die. In order to install in place before processing, it is necessary not only to ensure the smooth operation of the upper and lower molds, but also to ensure uniform surrounding clearance and uniform wall thickness of the extruded C-section steel.
During the processing of C-section steel, install the die and test the host. Then start the air compressor, vacuum pump, extruder, brick cutter, feeder, brick press, host and conveyor. When stopping, stop the extruder first, and then stop the rest of the equipment.
Before using the equipment, check whether the connection is firm, whether the mounting bolts and nuts are tightened, and conduct the engine electrical test after adding enough lubricating oil to the left and right chassis. The billet extruded by the extruder is cut into a certain length by the cutter, then transported to the brick press by the roller conveyor, and then transported to the lower die by the loader according to the specified procedure. After graduation, the blank extruded by the C-beam machine on the station is sucked by the vacuum suction cup of the brick unloader, and then placed on the blank support of the conveying line.
The wall thickness of C-beam produced by this method can be very thin, which greatly simplifies the production process and improves the production efficiency. It can produce all kinds of color steel cold bending equipment with average wall thickness but complex section shape, which are difficult to produce by ordinary hot rolling method.
The above content is all about the thick wall quality control of Jinan C-section steel shared today. I hope it can be helpful to you. If you want to know more, you can contact us by phone or pay attention to our website. Our staff will contact you in time and look forward to your call.