10年品牌值得信赖
精诚团结、奋起拼搏、开拓进取

济南彩钢板

13969159292

0531-88686388

新闻中心

首页>>新闻中心>>镀锌C型钢是怎么生产出来的?
新闻中心
联系我们
济南坚固彩钢工程公司

联系人:

电话:13969159292

地址:济南市工业北路81号北邻

镀锌C型钢是怎么生产出来的?

来源:http://www.jnjgcg.com/ 日期:2022-06-10 发布人:jiangucaigang
镀锌C型钢是怎么生产出来的?
How is galvanized C-shaped steel produced?
由于镀锌C型钢广泛应用于建筑构件,所以在生产的过程中也很严格。
As galvanized C-section steel is widely used in building components, it is also very strict in the production process.
1、传统方法生产时,一条生产线上要好几个人,费时又费力。
1. In traditional production, there are several people on a production line, which is time-consuming and laborious.
2、 如今许多工厂已可实现自动化流水线生产,加工流程:
2. Now many factories can realize automatic assembly line production, and the processing flow is:
①放料——②矫平——③成型——④定型——⑤矫直——⑥测长——⑦冲拉筋圆孔——⑧冲椭圆连接孔——⑨成型切断
① Feeding - ② leveling - ③ forming - ④ finalization - ⑤ straightening - ⑥ length measurement - ⑦ punching the drawstring round hole - ⑧ punching the elliptical connecting hole - ⑨ forming and cutting
优点:
advantage:
① C型钢经热卷板冷弯加工而成,壁薄自重轻,截面性能优良,强度高,与传统槽钢相比,同等强度可节约材料30%。
① C-shaped steel is processed by cold bending with hot coil, with thin wall, light weight, excellent section performance and high strength. Compared with traditional channel steel, the same strength can save 30% of materials.
② 镀锌C型钢具有规格尺寸可调、抗压强度大等优点。
② Galvanized C-section steel has the advantages of adjustable size and high compressive strength.
③ 通过冷弯成型的型钢,其断面尺寸虽然轻巧,却极符合屋面檩条的受力特点,使钢材的力学效能得到充分发挥利用。
③ The section steel formed by cold bending, though light in section size, is very consistent with the stress characteristics of roof purlins, making full use of the mechanical efficiency of steel.
图片
picture
多种配件还可连接成不同的组合方式,外型美观,使用型钢檩条,可减轻建筑屋面重量,及减少工程用钢量,所以也被称为经济高钢材,是替代槽钢、角钢、钢管等传统钢檩条的新型建筑材料。
A variety of accessories can also be connected into different combinations, with beautiful appearance. The use of profile steel purlin can reduce the weight of building roof and reduce the amount of steel used in the project. Therefore, it is also known as economic high steel. It is a new building material to replace traditional steel purlins such as channel steel, angle steel, steel pipe, etc.
而我们抗震支吊架所用的镀锌C型钢,表面光洁,锌层均匀,附着力强,尺寸精度高,所有表面被锌层包裹,使用寿命长抗腐蚀耐用经久。
The galvanized C-section steel used for our seismic supports and hangers has smooth surface, uniform zinc layer, strong adhesion and high dimensional accuracy. All surfaces are wrapped by zinc layer, with long service life, corrosion resistance and durability.
优嘉抗震支吊架产品表面为热浸锌处理,厚度不小于60μm,符合国家标准,欢迎联系选购。
The surface of Youjia anti-seismic supports and hangers is hot-dip galvanized with a thickness of no less than 60 μ m. In line with national standards, welcome to contact us for purchase.
本文的精彩内容由济南C型钢厂提供知识提供,本网站还有很多的精彩内容,更多的内容您可以点击进入:http://www.jnjgcg.com我们有专门的客服为您解答问题
The wonderful content of this article is provided by Jinan C-section steel plant. There are many wonderful content on this website. You can click to enter more content: http://www.jnjgcg.com We have special customer service to answer your questions
此文关键词: 济南C型钢厂  

推荐阅读/ Recommended reading

1:彩钢板产品浪边或者中松鼓肚现象:主要是基板存在的质量问题。因厚度不均匀造成的浪边现象较为多,其他的因设备问题的比较少一部分,这

彩钢板跟彩钢净化夹芯板一样吗? 2022-06-30
复合板抗压强度及吸声性能受什么因素影响 2022-06-28
关于济南彩钢板材爆漆现象的原因 2022-06-25
复合板的测定方式以及四大分类要点 2022-06-23