热门关键词：济南彩钢板 | 济南复合板 | 济南彩钢瓦 | 济南c型钢 | 济南钢结构 |
Composite board is a very easy-to-use thermal insulation product with excellent performance, good stability in use, good corrosion and anti-aging resistance and waterproof characteristics. It is a very good environmental protection material. What is the correct treatment method and usage of composite board?
Correct composite board treatment method
Apply a wet stain to the laminate and wipe off the excess stain before drying. Apply a layer of stain and let it dry without wiping. If you don't use a spray gun, the first method is usually good. As long as the surface of the composite board is ready and there are no natural spots, a uniformly colored surface can always be obtained. If you spray stains with a spray gun, both methods are OK.
Dyeing with the first method requires a lot of attention. After application, it should always be applied along the texture of the composite board and wipe off the stains. In fact, as long as all excess stains are wiped off, the application direction does not matter. Usually, wet cloth is used to quickly smear on the laminate surface in any direction, and the direction is irrelevant when removing stains. It is important that the subsequent wiping is done along the texture, so that any stripes inadvertently generated will become less obvious.
Correct use of composite board
Composite board can also play a good decorative role through correct use. You can make it flexible and personalized. Because of its cutting processing and corresponding composite processing and bonding processing, the method is relatively free, so it can be realized and simple. Decoration, to achieve significant color patterns and shapes, naturally has significant advantages in building materials.
When the composite board meets non-standard size, it can be cut on site. When cutting, pay attention to the neat size of the edge, and the notch should be perpendicular to the surface of the polystyrene board. When laying, it should be pasted horizontally from bottom to top, staggered from top to bottom, and the wall corners should be staggered and interlocked. The lap width of alkali resistant mesh shall not be less than 50mm, and dry lap is strictly prohibited.
Jinan composite board factory believes that the alkali resistant mesh at the inner corner should be spliced, and its width should be ≥ 50mm; The outer corners shall also be overlapped, with a width ≥ 200mm. The alkali resistant mesh shall be flat and wrinkle free, and the mortar shall be 100% full.
In a word, the price of composite board is not only cheap, but also excellent waterproof and thermal insulation. It has a very high cost performance ratio, and has a very competitive advantage in similar products. Follow our website when shopping http://www.jnjgcg.com Consult and understand!