10年品牌值得信赖
精诚团结、奋起拼搏、开拓进取

济南彩钢板

13969159292

0531-88686388

新闻中心

首页>>新闻中心>>不要把C型钢和槽钢混为一谈!
新闻中心
联系我们
济南坚固彩钢工程公司

联系人:

电话:13969159292

地址:济南市工业北路81号北邻

不要把C型钢和槽钢混为一谈!

来源:http://www.jnjgcg.com/ 日期:2022-11-03 发布人:jiangucaigang
大多数人都很容易把C型钢和槽钢混为一谈,认为C型钢就是槽钢,其实并不是的,它们之间还是有一些不同的,下面就由济南C型钢厂小编来告诉大家C型钢和槽钢有什么不同吧。
Most people easily confuse C-section steel and channel steel. They think that C-section steel is a channel steel. In fact, it is not. There are some differences between them. Now let's talk about the differences between C-section steel and channel steel by the editor of Jinan C-section Steel Plant.
一、概念不同
1、 Different concepts
C型钢是经热卷板冷弯加工而成的,壁薄且自重轻,截面性能优良,强度高,与传统槽钢相比,同等强度可节约材料30%左右。而槽钢是热轧生产的,由钢铁厂直接供货,而且厚度较大,截面形状为凹槽形的长条钢材。
C-shaped steel is formed by cold bending of hot rolled plate, with thin wall and light weight, excellent section performance and high strength. Compared with traditional channel steel, the same strength can save about 30% of materials. The channel steel is produced by hot rolling and supplied directly by the steel plant. It is also a long steel strip with large thickness and groove section.
二、分类不同
2、 Different classifications
C型钢可以分为镀锌C型钢、热镀锌电缆桥架C型钢、不等边C型钢、汽车型材C型钢等多种类型,而槽钢只可以分为:普通槽钢和轻型槽钢。
C-shaped steel can be divided into galvanized C-shaped steel, hot-dip galvanized cable tray C-shaped steel, unequal edge C-shaped steel, automobile profile C-shaped steel and other types, while channel steel can only be divided into ordinary channel steel and light channel steel.
济南C型钢厂
三、用途不同
3、 Different uses
C型钢的使用范围特别广泛,主要用于钢结构建筑的檩条、墙梁,也可自行组合成轻量型屋架、托架等建筑构件。而槽钢主要用于建筑结构、车辆制造和其它工业结构,槽钢还常常和工字钢配合使用。虽然都能用于建筑行业,但用途还是不同。
C-shaped steel is widely used, mainly for purlins and wall beams of steel structure buildings, and can also be combined into lightweight roof trusses, brackets and other building components. The channel steel is mainly used for building structures, vehicle manufacturing and other industrial structures. The channel steel is often used together with the I-beam. Although they can be used in the construction industry, their uses are different.
C型钢加工流程:
Processing process of C-shaped steel:
放料①——矫平②——成型③——定型④——矫直⑤——测长⑥——冲拉筋圆孔⑦——冲椭圆连接孔⑧——成型切断⑨
Placing ① -- leveling ② -- forming ③ -- shaping ④ -- straightening ⑤ -- measuring length ⑥ -- punching round hole of tie wire ⑦ -- punching elliptical connection hole ⑧ -- forming and cutting ⑨
C型钢经热卷板冷弯加工而成,壁薄自重轻,截面性能优良,强度高,与传统槽钢相比,同等强度可节约材料30%。通过上述的介绍,镀锌C型钢具有规格尺寸可调、抗压强度大等优点。
C-shaped steel is formed by cold bending of hot coil, with thin wall and light weight, excellent section performance and high strength. Compared with traditional channel steel, the same strength can save 30% of materials. Through the above introduction, galvanized C-shaped steel has the advantages of adjustable size and large compressive strength.
通过冷弯成型的型钢,其断面尺寸虽然轻巧,却符合屋面檩条的受力特点,使钢材的力学效能得到充分发挥利用。
Although the section size of the cold-formed steel is light, it conforms to the stress characteristics of the roof purlin, making full use of the mechanical efficiency of the steel.
多种配件还可连接成不同的组合方式,外型美观,使用型钢檩条,可减轻建筑屋面重量,及减少工程用钢量,所以也被称为经济钢材,是替代槽钢、角钢、钢管等传统钢檩条的新型建筑材料。更多相关内容就来我们网站http://www.jnjgcg.com进行咨询了解吧!
A variety of accessories can also be connected into different combinations with beautiful appearance. The use of section steel purlins can reduce the weight of building roofs and reduce the amount of steel used in the project. Therefore, it is also called economic steel, which is a new building material to replace traditional steel purlins such as channel steel, angle steel, and steel pipes. More relevant content will come to our website http://www.jnjgcg.com Consult and understand!
此文关键词: 济南C型钢厂  

推荐阅读/ Recommended reading

彩钢瓦长时间处于风吹日晒的环境里,表面漆层老化后,就会出现发白粉化现象,空气中的氧气与基板直接接触,导致生锈,所以需要喷漆翻新,那

复合板的安全正确使用不是小事 2022-12-01
彩钢瓦的使用特点以及施工事项 2022-11-29
使用彩钢复合板时需要注意的安全知识 2022-11-26
C型钢在我们日常生活中的应用好处 2022-11-24