热门关键词：济南彩钢板 | 济南复合板 | 济南彩钢瓦 | 济南c型钢 | 济南钢结构 |
Colored steel tiles, also known as colored pressed tiles, are shaped plates made of colored coated steel plates that are rolled and cold-formed into various wave shapes. Mainly suitable for the decoration of roofs, walls, and internal and external walls of industrial and civil buildings, warehouses, special buildings, and large-span steel structure houses. It has the characteristics of light weight, high strength, rich color, convenient and fast construction, earthquake resistance, fire prevention, rain prevention, long service life, and maintenance free, and has been widely promoted and applied.
When installing colored steel tiles, when walking on the tiles, try to step on the middle part of the tiles as much as possible to avoid stepping on the edges of the tiles. Remember to install carefully in adverse weather conditions. Below, Jinan Color Steel Tile Factory will explain the correct laying method of color steel tiles:
Overlapping type (suitable for roofs with a length ≤ 15M)
Staggered (suitable for roofs with a length of ≥ 15M)
Proper use of specialized nails
The specialized nail must be punched in the middle of the tile bone to have a waterproof effect.
The fixed interval between specialized nails is 50CM to 100CM (4 pieces/㎡) horizontally and vertically.
Special nails must be driven from the lower end of the tile towards the roof to achieve a beautiful, sealed, and neat effect.
Install the sealing strip ridge tile eaves cover
Divide the sealing strip in half and press it against the tile shape on the roof, covering it with ridge tiles and fixing it with special nails.
The joint of the side tiles is sealed with cement and directly covered with the ridge tiles. The bottom of the ridge tiles is closed with a small tile block.
Install the eaves cover directly at the lower end of the tile and fix it with screws.
At the junction of the ridge tiles, use scissors to trim and shape the interface, overlap it, and seal it with glass glue.
Waterproofing treatment for protruding parts
First, make a V-shaped material, which can be of different materials and specifications depending on the actual situation. Install the water connection at the bottom and then lay colored steel tiles on top.
Installation of inclined plane connection
It refers to the construction of two roof tiles that are cut according to angle and length and then installed with water connection treatment at the bottom. First, install water connection materials (i.e. gutters) under the tiles, and then use waterproof adhesive or cement for final treatment.
That's all for the correct laying method of colored steel tiles. I hope it can be helpful to you. For more information, please come to our website http://www.jnjgcg.com Consult!