• 地址:济南市工业北路81号北邻
  • 电话:0531-88686388
  • 手机:13969159292
  • 网址:www.jnjgcg.com
新闻中心当前位置:首页-新闻中心
    讲解一下用户可选的C型钢切割方式
    发布来源:http://www.jnjgcg.com/  2017-1-14 10:34:11 发布人:济南坚固彩钢
    C型钢应用可以说是相当的广泛,不仅可以作为钢结构建筑中的檩条、墙梁;也可以自行组合成轻量型屋架、托架等建筑构件。不管是哪种用途,都会涉及到同一个问题,那就是C型钢的切割。由于不同的切割方法有着不同的切割效果,因此需要按照客户的要求进行适当的选用。
    Application of C type steel can be said to be quite extensive, purlin, wall beam can be used not only in the steel structure; can also self assemble into the lightweight roof bracket, and other building components. No matter what kind of use, will involve the same problem, that is, C steel cutting. Because of the different cutting methods have different cutting effect, so the need to choose according to customer requirements.
    一般情况下,C型钢在钢结构中应用的话,它的切割尽可能选择在剪切机上或锯床上进行,尤其是对于薄壁型钢屋架。之所以这么建议,是因为这里要去下料要准确,更易电动锯割法做为适合,不仅工效高,而且断面光滑平整、质量好,切割误差非常的小。
    In general, the application of C steel in the steel structure, it cut as far as possible to choose in shearing machine or sawing machine, especially for the thin-walled steel roof truss. The reason why such a proposal, because it is necessary to go to the material to be accurate, the most easy to do as the electric saw cutting method, not only high efficiency, and smooth cross-section, good quality, cutting error is very small.
    当然,C型钢也可以采用气割的方式,但为了提高气割质量,更好采用小口径喷嘴,并在切割后用锤子轻轻敲打,使切口平整,满足各种用途的要求。
    Of course, C steel can also be used in cutting way, but in order to improve the cutting quality, the best use of a small caliber, and after cutting it lightly with a hammer knock, make the incision smooth, meet various application requirements.
    公司始终坚持不断进行管理创新和科研创新,将以优良的品质、完善的售后服务赢得广大客户的信赖与支持,欢迎广大新老客户来我公司实地考察,洽谈合作!
    The company always adhere to the continuous management innovation and scientific innovation, will win the support and trust of customers with excellent quality and perfect customer service service, welcome new and old customers to visit our company to negotiate cooperation!