• 地址:济南市工业北路81号北邻
  • 电话:0531-88686388
  • 手机:13969159292
  • 网址:www.jnjgcg.com
新闻中心当前位置:首页-新闻中心
    C型钢的制作流程
    发布来源:http://www.jnjgcg.com/  2017-5-22 10:31:01 发布人:济南坚固彩钢
    C型钢的制作流程:
    C section production process:
    一步就是放料。C型钢都是经热卷板冷弯加工而成,壁薄自重轻,截面性能优良,强度高,与传统槽钢相比,同等强度可节约材料30%。一般情况下,C型钢都是由C型钢成型机自动加工成型的。C型钢成型机根据给定的C型钢尺寸就可以自动完成C型钢的成型工艺。 这其中又涉及到冷轧成型和热轧成型,这里就不多说了。
    The first step is to release the material. C payments are processed by hot rolling and cold bending, wall thin light dead weight, the cross section of good performance, high strength, compared with the traditional channel, equal strength can save 30%. Normally, C shaped steel is made by automatic machining of C shaped steel. The forming process of C shape steel can be completed automatically according to the size of a given C steel section. This involves cold rolling and hot rolling.
    第二步就是矫平。这个得需要C型钢成型机的全力辅助和工人的从旁监督了。
    The second step is flattening. This requires the full support of the c-section and the worker's supervision from the side.
    第三步就是成型。到了这一步,C型钢才算是有了个基本的形状了。
    The third step is molding. At this point, the C shape is a basic shape.
    紧接着第四步就是定型。这时候基本上我们就可以看到“C”形状的钢材了。
    Then the fourth step is the stereotype. And then basically we can see the "C" shape of the steel.
    然后第五步就是矫直。光有了形状也不行啊,还得慢慢的矫正,C型钢的规格一定要符合国标。
    Then the fifth step is straightening up. The light has a shape not to be able, still need to be corrected slowly, the specification of C section steel must accord with national standard.
    第六步就是测长。这一步就不一一细说了,这都是必经的步骤。
    The sixth step is measuring the length. This is a step that we're going to go through.
    第七步就是冲拉筋圆孔。可以说到现在就已经快要接近成功了。
    The seventh step is to make a circular hole. We can say that we are almost there.
    第八步就是冲椭圆连接孔。这一步纯粹是接着上一步进行的。
    The eighth step is to punch the oval. This step is purely a step forward.
    更后一步,成型切断。这一步就是给C型钢进行具体的规格划分了。千万不能马虎。
    The final step is to cut it off. This step is to make a specific specification for section C. Don't be careless.
    好了,小编今天就为大家简单介绍到这里啦!明天的咨询会更精彩哦!请大家不要错过哦!
    Ok, let's make it easy for you today. The consultation tomorrow will be more exciting! Please don't miss it!