• 地址:济南市工业北路81号北邻
  • 电话:0531-88686388
  • 手机:13969159292
  • 网址:www.jnjgcg.com
新闻中心当前位置:首页-新闻中心
    C型钢设备生产流程
    发布来源:http://www.jnjgcg.com/  2017-11-29 16:40:36 发布人:济南坚固彩钢
    济南C型钢厂是液压动力,而且功率很大,一般在22KW左右,类似于剪板折弯机,一般控制过程复杂,多采用PLC控制。
    Ji'nan C steel plant is hydraulic power, and the power is very large, generally around 22KW, similar to the shear plate bending machine. The general control process is complex, and PLC control is adopted.

    C型钢机是一套轧辊可生产多种规格C型檩条成品的单卷成型机组。该机主要由被动装料架、整平装置、冲孔装置、成型后切断装置、液压站、电脑控制系统等。济南C型钢厂采用自动飞锯冲孔,操作简便等特点。C型钢机主要用途产品可作为大中型工业民用建筑的主体受力结构。

    济南C型钢厂

    C type steel machine is a set of roll single roll forming machine production of various specifications of C purlin finished. The machine is mainly composed of passive loading rack, leveling device, punching device, forming cutting device, hydraulic station, computer control system and so on. The C type steel plant in Ji'nan adopts automatic flying saw punching, easy to operate and so on. The main purpose products of C type steel machine can be used as the main force structure of large and medium-sized industrial and civil buildings.
    C型钢机设备使用的模具需一个上模和六个相同规格尺寸的下模,先安装上模和一个下模,下模直接安装在六方转轮工作台上,上模安装在滑座底面上,并放置适当厚度的垫板,保证上下模合模后,四周边间隙均匀,上下模之间距离等于所需瓦坯的厚度。然后再以上模为准,工作台转位,安装其余五付下模,全部安装好上下模以后才能开车进行压瓦。
    The mould of C steel machine using a mold and six of the same size, install the upper die and a lower die, lower die mounted directly on the six wheel on the upper die is mounted on the sliding seat on the bottom plate and placed on the appropriate thickness, guarantee under the die, around four uniform gap between the upper and lower die, a distance equal to the desired thickness of the tile billet. Then the above model is accurate, the worktable is transposition, the rest of the five down modes are installed, and all the upper and lower modes can be installed to drive the tile.
    客户的满意就是对我们的肯定,欢迎您前来选购我公司的产品,我们一直以为您提供产品为己任并一直坚持这样做。欢迎您的光临。
    Customer satisfaction is our affirmation. You are welcome to purchase our company's products. We have always thought that you are responsible for products and have always insisted on doing so. Welcome to your visit.