• 地址:济南市工业北路81号北邻
  • 电话:0531-88686388
  • 手机:13969159292
  • 网址:www.jnjgcg.com
新闻中心当前位置:首页-新闻中心
    c型钢的成型制作工艺
    发布来源:http://www.jnjgcg.com/  2018-8-30 14:08:13 发布人:济南坚固彩钢
    C型钢C型钢檀条采用高强度钢板经过冷弯压成型具有壁厚均匀规格尺寸可调,抗压的强度大等特点。通过冷弯成型后得到C型钢,其断面尺寸虽然较为轻巧,却不符合屋面檀条的受力特点使钢材的力学效能得到充分发挥,使用C型钢檀条可减轻建筑屋面的重量,减少工程用钢量,因而被称之为经济高效钢材,是替代角钢、槽钢、钢管等传统钢的檀条新型建筑材料。C型钢檀条与轻型金属瓦配合使用是轻钢建筑的更佳选择。
    C-beam C-beam sandalwood strip is formed by cold bending of high strength steel plate, which has the characteristics of uniform wall thickness, adjustable size and high compressive strength. C-shaped steel is obtained by cold bending. Although its section size is relatively light, it does not conform to the mechanical characteristics of roofing sandalwood strip, so that the mechanical efficiency of steel can be fully exerted. The use of C-shaped steel sandalwood strip can reduce the weight of building roof, reduce the amount of Engineering steel, so it is called economic and efficient steel, is a substitute for angle steel, channel steel, channel steel. Steel tube and other traditional steel sandalwood new building materials. The use of C steel bar and light metal tile is the best choice for light steel construction.
    C、Z型钢檀条的应用有如下的特点:
    The application of C and Z steel sandalwood has the following characteristics:

    1、自重轻、可减少地震的作用力,造价降低。

    济南C型钢厂


    1, light weight, can reduce the force of the earthquake, and reduce the cost.

    2、采制强度高,自身承重大,用钢量减少,可以增加使用的面积。
    2, the intensity of production is high, and its bearing capacity is large, and the amount of steel used is reduced, which can increase the area of use.
    3、施工简捷,因檀条可以从专业的加工厂直接将檀条长度裁好、冲孔、喷漆、同时完成,运到工地后进行直接安装C型钢。
    3. The construction is simple and convenient, because the sandalwood strip can be cut, punched, sprayed and completed directly from the professional processing plant, and then transported to the site for installation of C-section steel.
    C型钢广泛用于钢结构建筑的檩条、墙梁,C型钢也可以自行组合成轻量型屋架、托架等建筑构件。此外,C型钢还可以用于机械轻工制造中的柱、梁和臂等。C型钢檩条按高度的不同分为80、100、120、140、160五种规格,C型钢长度可根据工程设计确定,但是考虑到运输和安装等条件,C型钢全长一般不超过12米。C型钢是经过热卷板冷弯加工而成的,壁薄自重轻,截面性能优良,C型钢强度高,与传统槽钢相比,同等强度的钢铁可节约材料30%。
    C-shaped steel is widely used in purlins and wall beams of steel structure buildings. C-shaped steel can also be self-assembled into lightweight roof trusses, brackets and other building components. In addition, C steel can also be used for columns and Liang Hebi in mechanical light manufacturing. C-shaped steel purlins are divided into five specifications according to their height: 80, 100, 120, 140 and 160. The length of C-shaped steel can be determined according to engineering design. However, considering transportation and installation conditions, the full length of C-shaped steel generally does not exceed 12 meters. C-section steel is formed by cold bending of hot coil plate. It has light wall weight, excellent cross-section performance and high strength. Compared with traditional channel steel, the steel with the same strength can save 30% of material.