彩钢板之所以被称之为彩钢板，不是因其钢板是彩色的，而是因为它钢板的颜色分布很广，下面来讲讲济南彩钢板色彩大全以及处理工艺事项。

The reason why color steel plate is called color steel plate is not because its steel plate is color, but because its color distribution is very wide. Next, let's talk about the color of Jinan color steel plate and processing technology.

彩钢板色彩大全

Color book of color steel plate

黄色系列：米黄、奶黄、象牙黄、柠檬黄、土黄、驼黄、绒面黄等。

Yellow series: beige, cream, ivory, lemon, earth, camel, suede, etc.

橙色系列：桔黄、橙黄等。

Orange series: orange, orange, etc.

红色系列：绯红、高光绯红、红色、砖红、铁锈红、棕红、桃红、绒面红、宝石红、氟碳红色等。金属系列：银灰、氟碳银色、金粉色等。

Red series: crimson, high-gloss crimson, red, brick red, rust red, brown, peach, suede red, ruby, fluorocarbon red, etc. Metal series: silver grey, fluorocarbon silver, gold pink, etc.

蓝色系列：海蓝、淡蓝、天蓝、瓷蓝、深天蓝、月光蓝、氟碳海蓝等。

Blue series: sea blue, light blue, sky blue, porcelain blue, deep sky blue, moonlight blue, fluorocarbon sea blue, etc.

绿色系列：豆蔻绿、豆绿、深豆绿、荷叶绿、阔叶绿、浅绿、艳绿、深绿、墨绿、绒面绿等。

Green series: cardamom green, bean green, deep bean green, lotus leaf green, broadleaf green, light green, bright green, dark green, dark green, suede green, etc.

灰色系列：天灰、灰白、浅灰、中灰、淡灰、铁青灰、驼灰、深灰、氟碳灰白、氟碳中灰、氟碳浅中灰、绒面灰等。

Grey series: sky grey, gray, light grey, medium grey, light grey, iron grey, camel grey, dark grey, fluorocarbon grey, fluorocarbon medium grey, fluorocarbon light medium grey, suede grey, etc.

棕黑系列：炭黑、墨黑、棕色、黑色、绒面黑等。

Brown and black series: carbon black, ink black, brown, black, suede black, etc.

白色系列：白灰、象牙白、乳白、玉兰白、帝白、高光白、雪白、高光雪白、信号白、月光白、珠光白、氟碳白灰等。

White series: white gray, ivory white, milk white, magnolia white, imperial white, highlight white, snow white, highlight white, signal white, moonlight white, pearly white, fluorocarbon white, etc.

背漆系列：灰白背、芽黄背、钢白背、天灰背、棕色背等。

Back paint series: gray back, bud yellow back, steel white back, sky gray back, brown back, etc.

彩涂钢板的生产工艺：

Production process of color coated steel plate:

常见的是辊涂+烘烤工艺，一般是2涂2烘。

The common process is roller coating+baking, which is generally two coating and two baking.

预处理工艺：基板经脱脂、水洗后，经过磷化或复合氧化，在表面形成一层磷酸盐或复合氧化物膜，再经过钝化封闭处理，形成的预处理膜是提高基板和涂料之间附着力的有效手段。

Pretreatment process: After degreasing and water washing, the substrate is phosphatized or compound oxidized to form a layer of phosphate or compound oxide film on the surface, and then passivated and sealed. The pretreatment film formed is an effective means to improve the adhesion between the substrate and the coating.

涂敷工艺：彩涂机组一般采用辊涂方式将涂料涂敷在带钢表面。

Coating process: the color coating unit generally applies the coating on the surface of strip steel by roller coating.

烘烤工艺：涂料涂敷后，还需要使涂料固化，一般包括初涂烘烤、精涂烘烤及其相应的废气焚烧系统。

Baking process: After the coating is applied, the coating needs to be solidified, generally including the initial coating baking, the fine coating baking and the corresponding waste gas incineration system.

后处理工艺：后续加工包括涂层压花、金属印花、印花、覆膜等，也可以上蜡或加保护膜。

Post-treatment process: subsequent processing includes coating embossing, metal printing, printing, film covering, etc., and can also be waxed or added with protective film.

一般来说，可以根据制造商的标准颜色进行选择，这可以缩短早期生产的工作量。如果需要特殊颜色，由于涂料需要在涂料厂制作样品，性能满足要求。有需求就来我们网站http://www.jnjgcg.com咨询吧！

Generally speaking, it can be selected according to the manufacturer's standard color, which can shorten the workload of early production. If special color is required, the coating needs to be made in the coating factory, and the performance meets the requirements. Come to our website if you need http://www.jnjgcg.com Ask!