现阶段，C型钢连接前钢的主要产品之一。它立即使用于各个领域，以生产和生活不受其影响。到现在为止，人们挑选C型钢主要是因为C型钢的质量问题，以降低挑选劣质钢的可能性。下面济南C型钢厂来讲讲C型钢连接生产加工时的过程与细节。

At this stage, C-shaped steel is one of the main products before connection. It is immediately used in all fields so that production and life are not affected by it. Up to now, people choose C-shaped steel mainly because of the quality problem of C-shaped steel, so as to reduce the possibility of selecting inferior steel. Next, Jinan C-beam steel plant will talk about the process and details of C-beam connection production and processing.

流程1：进料

Process 1: Feeding

送料是将生产C型钢所需的材料放入对应的送料机中，将材料传对应的生产设备中，生产出的C型钢。送料是生产C型钢连接件的前提，立即影响后续加工工艺。因而，在卸料过程中，应挑选原材料，以C型钢的质量不受影响。

Feeding is to put the materials required for the production of C-shaped steel into the corresponding feeder and transfer the materials to the corresponding production equipment to produce C-shaped steel. Feeding is the prerequisite for the production of C-shaped steel connectors, which immediately affects the subsequent processing process. Therefore, in the process of unloading, raw materials should be selected so that the quality of C-shaped steel will not be affected.

过程2：成型

Process 2: Forming

成型是C型钢连接件生产的关键环节。由于成型意味着C型钢的形态已经出现，可以后续加工立即作用于成型钢，进而进一步提升其性能。

Forming is the key link in the production of C-shaped steel connectors. Since forming means that the shape of C-shaped steel has appeared, it can be processed immediately to act on the formed steel, and further improve its performance.

过程3：切断

Process 3: Cut off

C型钢连接件经别的环节加工后，具备本身性能，可依据实际效果切断，C型钢在各个领域的使用。

After being processed in other links, the C-shaped steel connector has its own performance and can be cut according to the actual effect. The use of C-shaped steel in various fields.

细节一：钢表层

Detail 1: steel surface

C型钢表层为无凹坑或颗粒的镜子。若发生这样的事情，表明所用材料中杂质较多，立即影响C型钢的质量。因而，人们不能挑选C型钢连接器，否则会造成各种各样使用故障，增加生产成本。

The surface of C-shaped steel is a mirror without pits or particles. If this happens, it indicates that there are many impurities in the materials used, which will immediately affect the quality of C-beam. Therefore, people cannot choose C-type steel connector, otherwise it will cause various use failures and increase production costs.

细节二：厚度

Detail 2: thickness

人们在挑选C型钢时，需要依据实际需要挑选C型钢。由于C型钢的厚度立即影响其承载能力。在大型建筑中，当人们需要具备良好承载能力的C型钢时，必须挑选厚壁钢。如果选壁厚较薄的C型钢，则完全无法承受对应的重量，这将增加事故发生的可能性。

When selecting C-shaped steel, people need to select C-shaped steel according to actual needs. Because the thickness of C-shaped steel immediately affects its bearing capacity. In large buildings, when people need C-shaped steel with good bearing capacity, they must select thick wall steel. If C-shaped steel with thinner wall thickness is selected, it can not bear the corresponding weight, which will increase the possibility of accidents.

只要我们注意以上宁夏c型钢厂家的小编介绍的两个细节，就可以确保实际效果不受影响。更多相关产品的信息或者需求，就来我们网站http://www.jnjgcg.com进行咨询吧!

As long as we pay attention to the above two details introduced by the small editor of Ningxia C steel manufacturer, we can ensure that the actual effect will not be affected. For more information or needs about related products, please visit our website http://www.jnjgcg.com Consult!