我们大家都是知道的c型钢的种类以及型号比较多，我们想每一件进行仔细的了解，很难去完成，所以说大家针对它的了解并不是非常多。下面济南C型钢厂来讲讲c型钢使用钝化和酸洗的作用。

We all know a lot about the types and models of c-beam steel. We want to have a careful understanding of each piece, which is difficult to complete, so we don't know much about it. Now let's talk about the role of passivation and pickling in Jinan C Steel Works.

热处理的方法也知道进行改变产品的表面以及化学成分以及结构而已，所以采用的方法不同所渗入表面元素不同而分为不同的方法。对于提高产品的耐磨性能以及耐腐蚀性以及耐疲劳性等等都是有非常好的效果以及工艺的。

The method of heat treatment also knows how to change the surface, chemical composition and structure of the product. Therefore, different methods are used to infiltrate different surface elements. It has a very good effect and process for improving the wear resistance, corrosion resistance and fatigue resistance of products.

此外，化学热处理发展是非常速度的，新技术应用也是越来多的，我们在进行c型钢带处理的时候主要是进行两种形式处理钝化和酸洗。

In addition, the development of chemical heat treatment is very fast, and the application of new technologies is also increasing. When we treat c-shaped steel strip, we mainly carry out two forms of treatment, passivation and pickling.

目前这两种形式主要是用来进行处理钢带表面的，这两者之间的区别还是比较大的，钝化的主要目的是防止产品氧化腐蚀。同时针对于酸洗处理，这也是为了去除高温溶解，热处理或者是热加工之后表面的氧化皮。

At present, these two forms are mainly used to treat the surface of steel strip, and the difference between them is relatively large. The main purpose of passivation is to prevent oxidation and corrosion of products. At the same time, it is aimed at pickling, which is also to remove the oxide skin on the surface after high temperature dissolution, heat treatment or heat processing.

酸洗同时还是可以清理到红绣腐蚀的c型钢一些不是那么纯净的铁颗粒的污染物，但是有一点是需要大家多多注意的，就是如果采用酸洗之后表面的酸液没有清理干净的话，他的表面就会出现生锈出现腐蚀等等一些现象，导致后面的钢材表面的耐腐蚀性大大的下降，这个工艺目前是使用在c型钢带的表面处理。酸洗操作回导致金属表面杂质的去除，然后在稍微的改变一下尺寸，所以说一定要改变。

At the same time, acid pickling can also remove some contaminants of impure iron particles from the red rust corroded c-section steel. However, we should pay more attention to one thing: if the acid solution on the surface is not cleaned up after acid pickling, rust and corrosion will occur on the surface of the steel, which will greatly reduce the corrosion resistance of the steel surface, This process is currently used in the surface treatment of c-type steel strip. The pickling operation will lead to the removal of impurities on the metal surface, and then slightly change the size, so it must be changed.

不同的表面处理方法给产品带来不同的效果，但是两种处理工艺的目的是不同的，纯化主要是为了防止产品的表面出现氧化以及腐蚀，酸洗是去除表面的氧化皮和一些污染物。

Different surface treatment methods bring different effects to the products, but the purposes of the two treatment processes are different. Purification is mainly to prevent oxidation and corrosion of the product surface. Pickling is to remove the oxide skin and some pollutants on the surface.

在应用上，我们一定会根据实际情况选择c型钢使用的哪个流程，事实上，是提高产品的性能以及处理过程为主要的目的。更多相关事项就来我们网站http://www.jnjgcg.com进行咨询了解吧！

In terms of application, we will definitely choose which process to use for c-beam according to the actual situation. In fact, the main purpose is to improve the product performance and the processing process. Come to our website for more information http://www.jnjgcg.com Consult and understand!